I fly YAK almost everywhere. It is superior 3D aerobat.
It came up after successful model FLASH.
I built-in HP-Z2213-20 Hyperion motor and a 20A Hyperion speed controller.
You can buy Yak-54 byRC-Factory.
I fly YAK almost everywhere.It is a brutal 3D acrobat.
It came up after successful model Yak-54.
I built-in HP-Z2213-20 Hyperion motor and a 20A Hyperion speed controller.
You can buy Yak-55 byRC-Factory.
This airplane is suitable for air race F3P or F3P-B, that's what I use it for.
It has wingspan 800 mm,flying weight 120gram.
I use motor HP-Z1705-14 with 8A speed controller;supply by 2S LiPol Fullriver 250mAh, prop GWS 8"x4", three servos FS-31 Pico 4,7g, receiver Spectrum AR 6100E.
Produced by RC-Factory.RC-Factory.
Wampire has wingspan 600mm, flying weight 100g.
Motor is ducted fan GWS EDF 50/3 RC-Factory.
Speed controller is Jeti 8A powered by 2S LiPol Litlestorm 300mAh,
Suitable for indoor, but outdoor in the calm weather as well.
Produced by RC- Factory.
Katana has wingspan 2600mm, lenghts 2400 mm and flying weight 14kg.
Motor is Gigatex 7kw produced by Freeair.
Speed controller Jeti 300A powered by 2OS LiPol Litestorm 5000mAh,
Produced by Krill Manufacturer of model.
This airplane came up from its predecessor Katana F3A
Wingspan 940 mm, lenght 910 mm and flying weight 660g.
Motor HP-Z2213-16
Speed controller HP-Titan-20P powered by 3S LiPol E-Tech 1350mAh,
four servos Waypoint, receiver Spectrum AR 7000.
Heliose can be bought byRC-Factory.
This planes is dedicated to outdoor aerobacy, so called F3A
Wingspan is 1880 mm, lenght 1980 mm and flying weight 5000g.
I use the motor Hacker Acro Competition , brushless with gear box.Propeller
APC 22"x 12".Speed controller JETI 90A, battery 10S LiPol Litestorm 5350mAh;
four digital servos JR, receiver Spectrum AR 9000.
Produced by JM-Composite pana Macha.
Red Baron's Wingspan is 520mm, lenght 450mm and flying weight 100g.
Motor is tuned Pot-30 made byPotensky.
Speed controller Jeti 8A powered by 2S Fullriver 250mAh.
I fly it for indoor pylon race .
Red Barona is produced by Hacker Model Production.
Model is suitable for air race both F3P and F3P-B categories,That is what I use it for.
It has wingspan 800 mm and flying weight 120g.
I use motor HP-Z1705-14 with 8A speed controller, powered by 2S LiPol Fullriver 250mAh.
Prop is GWS 8"x4"; three servos FS-31 Pico 4,7g, receiver Spectrum AR 6100E.
Produced by RC-Factory.RC-Factory.
I use YAK for indoor flying, especially aeromusical.
It has wingspan 860 mm, leght 870 mm and flying weight 150g. It was designed by Gernot Bruckmann from Austria, the German Indoor Champion 2007.
I bought it there from him, I mean I bought the depron kit only.
I use motor AXI 2204/54 GOLD LINE s 8A controller powered by 3S LiPol LiPol Fullriver 250mAh.
THe propeller is orange GWS 8"x4"; three servos Waypoint W-060, receiver Spectrum AR 6100E.
This is already my third piece of YAK-55.
Wingspan 590mm, lenght 615mm and flying weight 150g.
Motor is Pot-30 from Potensky.
Controller Jeti 8A powered by 2S LiPol Litlestorm 300mAh.
I use it just for fun in the very small spaces, as I expanded it in order to make it able to fly with Pot-30.
Uzi is produced in three sizes by POTENSKY
This plane is suitable for RCA air-race and I use it for it.
Wingspan is 1705 mm, lenght 1723 mm, wing-surface is 49,2 dm2 and flying weight from 3,4 upto 3,6 kg.
There is recommended motor Hyperion 4035-14 with the prop APC - E 16"x12" až 17"x12". The 85A controller powered by 8S LiPol of capacity from 4350mAh
We tested Katan for RC Revue jopurnal and you can buy it by RC-Factory.
It is typical EPP acrobat; I fly it for training and horseplay.
The parameters are: wingspan 1000 mm, lenght 1000 mm and weight 360 - 440g.
I bulit in the motor HCS C 200W/2-3 with speed controller Jeti 25A, powered by 3S E-TECH blue 1350mAh.The weight of this set was close to 470g. My father has got one with the motor HCS C 150W/2-3 powered by 3S 800mAh Litestorm. This one is lighter, about 430g, conseguently the flight impression is not so sexy compared to 200W motor.
Buy Flash by RC-factory.